If your attic insulation is old, dirty, packed down or full of mouse droppings, adding more on top only buries the problem. The fix is to vacuum the old insulation out, seal the air leaks in the attic floor, and blow in fresh insulation. Here’s what decides the cost of that job in southeast Wisconsin, and why the only number worth trusting comes from someone standing in your attic.
Why online price estimates miss
Most “cost per square foot” numbers you’ll find online leave out half the job. They don’t know how deep your old insulation is, whether there are rodent droppings to deal with, how many air leaks are hiding under it, how many recessed lights need covers, or whether your attic hatch is a pull-down stair or a tight scuttle in a closet. Two attics the same size can easily land thousands of dollars apart. That’s why we look at every attic in person before we put a number on it.
What actually drives the price
- How much is up there and what shape it’s in. A deep layer of old blown-in, or insulation contaminated by rodents or water, takes more time and more disposal than thin, dry batts.
- Attic size and layout. Low slopes, tight eaves and multiple attic sections all add time.
- Access. A pull-down stair is faster than a small hatch in a closet ceiling.
- Air leaks. Gaps around chimneys, plumbing stacks, wiring and the tops of walls have to be sealed before new insulation goes in.
- Recessed lights and venting. Each can light needs a cover so insulation can sit against it safely, and the eaves need vent baffles so the roof can breathe.
- How far you want to go. Blown fiberglass, or spray foam on the attic floor topped with fiberglass. We price all three levels side by side on every attic estimate so you can choose.
- Whether you need removal at all. If what’s there is clean and dry but just too thin, topping it off costs far less.
Why air sealing matters more than the insulation
Warm air escapes into the attic through gaps around chimneys, plumbing, wiring, light fixtures and the tops of interior walls. Insulation slows heat, but air walks right through it. Sealing those gaps before the new insulation goes in is what actually stops the drafts, and it’s also what qualifies most jobs for the Focus on Energy rebate. It’s the step many companies skip.
What brings the cost down
- Focus on Energy rebate: at least $1,500 on qualifying Wisconsin homes when the job includes air sealing plus added attic insulation on an attic of 600 square feet or more. We’re a Focus on Energy Trade Ally and handle the paperwork.
- Financing: as little as $99 a month with approved credit.
- Military discount on qualifying whole-home projects.
When you need removal (and when you don’t)
Removal makes sense when the insulation has rodent droppings or nesting, water stains or mold, smoke damage, or has been crushed down from storage or foot traffic. If it’s clean and dry, topping it off is usually the better value, and we’ll tell you so.
A note on vermiculite
Vermiculite is a pebbly, gray-brown or gold loose fill found in some older Wisconsin attics, and it can contain asbestos. We do not remove vermiculite. If we see it at the estimate, we’ll tell you; it has to be tested and, if needed, removed by a licensed abatement contractor first. Once the attic is cleared, we can air seal and insulate.
Common questions
How long does it take?
Most attics are done in one to two days: removal first, then air sealing, then the new insulation.
Will it make a mess in my house?
The old insulation goes out through a hose into bags, and the work area inside is covered. The goal is that the only sign we were there is a warmer house.
Can you give me a price over the phone?
Not an honest one. We need to see the depth and condition of what’s up there, the air leaks and the access. The estimate is free, Erik does it himself, and you get your options in writing.
Get a free attic estimate
Cozy Walls is a veteran-owned insulation contractor based in Waukesha, serving Milwaukee, Waukesha and southeast Wisconsin. See our attic insulation and removal page, request a free estimate, or call 262-592-5381.